Flame-retardant wear-resistant ceramic lagging for rollers

Ceramic rubber lagging primarily involves embedding alumina ceramic blocks with 92% content into rubber sheets through vulcanization, then using advanced cold vulcanization technology to bond the ceramic rubber sheets onto drums, providing extremely high friction coefficients for drive drums. The excellent friction coefficient effectively prevents conveyor belts from slipping in wet and muddy working environments. The semi-vulcanized adhesive layer directly interacts with imported cold vulcanization adhesives, ensuring strong bonding strength between the rubber sheets and the drum. The effective distribution of ceramics reduces the overall material weight, making operation and installation easier, extending the drum's service life, and offering superior cost-performance ratio and excellent water drainage properties. Material waste is minimized. The service life of ceramic rubber sheets is generally 6 to 8 years. Although the initial investment is relatively high, the overall cost-effectiveness is very high.

Ceramic rubber lagging significantly reduces replacement frequency, saving maintenance costs associated with drum replacement and minimizing indirect losses from conveyor downtime. Companies using cold-bonded ceramic rubber lagging will see a gradual reduction in replacement volume as ceramic-lagged drums become more widespread. The wear resistance of ceramic-lagged drums is notably effective.

Precautions for ceramic rubber sheets:

1. The metal primer of ceramic rubber sheets is sensitive to water and should be stored carefully.

2. In low-temperature or humid environments, the adhesive film must be baked, and the curing time should be extended. The longer the curing time, the higher the bonding strength.

3. The adhesive of ceramic rubber sheets must not come into contact with water. The belt to be bonded must be kept thoroughly dry; otherwise, the curing degree and bonding strength may be affected.